Comfort Craft’s Top 4 Ergonomic Products

If you are looking for ergonomic products for the massage workplace, such as massage tables, spa tables, stools, and the like, then you have come to the right place. Comfort Craft has been the pioneer of the top ergonomic products for the massage workplace in the industry. If you are looking for any table for your comfort as a physical therapist and the comfort of your clients, then you will most likely find these four top ergonomic products by Comfort Craft to be what you are looking for:

Model 850

Comfort Craft’s table Model 850 (which is similar to table Model 800 in the listing below) has a lateral rear unit, which will move 25 degrees in either direction for working the lower extremities during side-to-side movement. This unique feature was designed for Active Release Technique (ART) and other types of treatment that require movement during therapy. The second new feature is the removable shoulder extension at the front pad area. This design provides a front pad that can change from a 30”/32” wide pad to a 16” wide chest pad that allows for total shoulder movement in the face-down or face-up positions. There is also a special foam in the center of the pad for chiropractic-type adjustments, yet it still offers the comfort of a massage table.

Model 800

Comfort Craft’s table Model 800’s mid-split design, also known as the bend, helps patients be in a relaxed position so therapists can open the back area with little effort. The smooth, electric powered mid-split design dramatically improves treatment because the patient’s back is immediately taken out of compression the way it is on regular flat massage tables. Effortless ergonomics are easily obtained using the cutout in the pad to step in close to the body, allowing therapists to use their own weight, not their strength during the session. This reduces the work effort of the therapist while increasing energy levels. The therapist can then open and lengthen the body with comfortable strokes. The head pillow aligns the head with the body, which gives the patient total support, helps the release, and aids in the relaxation of the body.

Model 300

Comfort Craft’s table Model 300 reduces a therapist’s workload by 50% and allows the patient to relax into a neutral position during the massage. Using the dual foot controls on either side of the table, different body positions are easily obtained. The patient’s position is enhanced by using the power mid-split, which helps relax the patient’s body into a neutral position. Removing the headrest allows the therapist to move the patient’s head in any position, offering complete release and relaxation of the neck muscles. 

The T-Base Stool

This is Comfort Craft’s number one bestselling stool for the massage industry. The stool is equipped with a large wheel castor system and non-rotating seat allowing the therapist to control the stool completely by using the leg muscles. This stool has an ergonomic design which allows the knee to be higher than the hip when you are seated, using the sit muscles for movement control. By using a series of different gas cylinders, Comfort Craft is able to create a stool that has a variety of height adjustments ranging from extremely low to high. So not only is the T-base ergonomic stool comfortable to sit on, but it is perfect for all sitting positions, whether you need the stool to stay tall or low to accommodate your height and most relaxed pose.

These four top ergonomic products for the massage workplace by Comfort Craft are also the top products in the industry, providing the most comfort for client and therapist.